PlayStation®5
Cronus Zen™ is fully compatible with all PlayStation® 5 console models, including both DualSense™ and DualSense Edge™ controllers, either when paired with the new Cronus Zen Link™ Wi-Fi Expansion Module (available to purchase here), or through the Bypass method.
PlayStation®5 Consoles
PlayStation®5
YES
PlayStation®5 Digital
YES
PlayStation®5 Slim
YES
PlayStation®5 Pro
YES
DualSense™
YES
DualSense Edge™
YES
Rumbles & Haptic Feedback
YES
Adaptive Triggers
YES
Two Finger/Swipe Touchpad
YES
Gyroscope
YES
Wired Headset (USB Only)
YES
Cronus BEAM® Gamepacks
YES
Wired Headset Support
If you're using a wired headset connected to your DualSense™ controller, the headset will only function when the controller is connected to the Cronus Zen™ via USB as 3.5mm audio & microphone is not available over a Bluetooth® controller connection.
However, if you have a USB or wireless headset connected directly to your console, you're all set! Simply connect your DualSense™ to the Cronus Zen™ via Bluetooth, and you're good to go. 😁
Note: The DualSense™ controller Mic & Speaker is not supported at this time.
Cronus Zen Link™ Wi-Fi Expansion Module
Cronus Zen Link™ is the most significant upgrade to Cronus Zen™ since its debut in December 2019. With the addition of Wi-Fi support, our team can now deliver new and exciting features that were simply not possible before, starting with full compatibility for the PlayStation® 5. Finally, the wait is over! 😆
This upgrade ensures your Cronus Zen™ will continue to evolve, enhancing your gaming experience without stretching your budget.
As of Zen Studio 1.6.1 Build 77, the Cronus Zen™ configuration software is now included so you no longer need to download a separate file.
Downloads
This page contains everything you need to set up your Cronus Zen™ with a PlayStation® 5 and DualSense® controller.
You'll need Zen Studio 1.6.1 Build 77 which now also includes the latest version 2.2.12 Firmware Update Tool for Cronus Zen™ 2.2.12 , and the latest configuration tool for the Cronus ZenLINK™.
Zen Studio 1.6.1 Build 77: Download 👈
PS Remote Play®: Download 👈
After installing the PS Remote Play® app, you'll be prompted to log in to your PSN® account. You'll only need to link to your PS5® just one time! and we'll handle the rest for you. ☺️
Step 1: PS5® Console Settings
You MUST apply the following settings on your PlayStation®5 before using Zen Link™ or any of the BEAM® Gamepacks. If these settings are not correctly configured, major M.O.D.s—such as Silent Aim v2 —will NOT function properly.
System
⚙️ System > Remote Play > Enable Remote Play
It's recommended these two other settings are disabled as a precautionary measure to protect against future updates that may affect compatibility or functionality.
System > System Software > System Software Update and Settings > Disable: Download Update Files Automatically Disable: Install Update Files Automatically
Power Saving
⚙️ System > Power Saving > Set Time Until PS5 Enters Rest Mode > Set While Playing Games to Don't Put in Rest Mode
⚙️ System > Power Saving > Features Available in Rest Mode > Supply Power to USB ports > Always
⚙️ System > Power Saving > Features Available in Rest Mode > Enable Stay Connected to the Internet
⚙️ System > Power Saving > Features Available in Rest Mode > Enable Turning on PS5 from Network
⚙️ System > Power Saving > Set Time Until Controllers Turn Off > Don't Turn Off
Controller (General)⚙️ Accessories > Controller (General) > Vibration Intensity > Strong (Standard)
⚙️ Accessories > Controller (General) > Trigger Effect Intensity > Strong (Standard)
⚙️ Accessories > Controller (General) > Communication Method > Use USB Cable
Note: DualSense Edge Controller settings can be found in Profile 1
⚠️ Note: Also see DualSense Curve settings at the bottom of this page.
Step 2: Setup PS Remote Play
If you haven't already, download 👈 and install the latest version of PS Remote Play® on a Windows® PC. You'll be prompted to sign in to your PSN® account and then it shouldn't take more than a minute to successfully pair to your PS5® (you only need to do this once).
Once you've completed this setup and successfully connected to your PS5® console, you can simply close the PS Remote Play® app. Don't worry, you won't have to repeat any of these steps again unless you change your PSN® account or Wi-Fi settings. 😎
Step 3: Install Zen Studio
It's important to first make sure the Cronus Zen™ and ZenLINK™ are updated to their latest versions or you won't have access to GamePacks , The GPC Scripts Library, or new features and latest fixes. This is all done from our Zen Studio software. Let's make sure your Cronus Zen™ is updated first.
Update to Cronus Zen™ Firmware 2.2.12
Download and install the latest Zen Studio 1.6.1 Build 77. This will also install the ZenLINK™ Configurator Tool (A shortcut is created on your desktop).
Put the Cronus Zen™ into Bootloader mode by holding the small blue reset button while connecting the Zen to a Windows® PC from its CONSOLE USB Port When it says "Zen Bootloader" on the LED screen, let go of the blue button.
Open Zen Studio and a popup will display "Cronus Zen not found." Click The Launch Update Tool button.
The Firmware Update Tool will detect the Cronus Zen™ and display its current version and unique serial number. Click on it then select Continue.
The tool will confirm that the Cronus Zen™ will be updated to version 2.2.12, click the begun Update button. This takes about 20 seconds. DO NOT unplug the Cronus Zen™ while programming as it may damage the device.
Once complete, close the update tool, unplug the USB cable from the rear CONSOLE USB Port of the Zen, and reconnect to the PROG USB Port on the right side of the Zen.
The Cronus Zen™ will now be detected and you will now have full access to the Gamepacks, GPC Scripts Library, and other exclusive tools.
Cronus Web Update Tool
You can also update your Cronus Zen™ at any time from any computer or mobile device with a web browser. It supports Chrome and Edge Browsers (Windows®, Mac®, Android Devices that support Chrome or Edge Web Browser w/ USB OTG wired connection).
Step 4: Zen Link™ One-Time Setup
Now it's time to setup and configure your Zen Link™.
New PS5® Native Method Instructions!
New PS5® Native Method Instructions!PS5® console owners — have you been struggling to get your Zen Link™ working with Remote Play? Great news, you no longer need to use Remote Play: PS5® native support is finally here! This is by far the best and most convenient way to use your Cronus Zen with Zen Link on a PS5®.
Simply update Zen Studio™ and your Cronus Zen™, then follow the video below to get started.
(Note: You will still need a Windows® 11/10 PC and 2.4 Ghz Wi-Fi Credentials. Bluetooth® must be OFF on your PS5® console)
Important Wi-Fi Setup Instructions
Make sure your Windows® PC is connected to the same Wi-Fi network as your PS5®. If your computer is currently using a wired LAN (Ethernet) connection, please temporarily disconnect the cable and switch to Wi-Fi for the duration of the PS Remote Play® and ZenLINK™ setup process.
⚠️ Note: Your Wi-Fi router must support the 2.4GHz band. Most modern routers combine both 2.4GHz and 5GHz into a single network, which is usually fine.
However, if your router has a separate SSID for each band, be sure to connect your Windows® PC to the 2.4GHz network specifically.
When you install Zen Studio, it now includes the latest ZenLINK™ Configurator Tool (a shortcut is created on the desktop).
Put the ZenLINK™ into config mode by connecting ZenLINK™ to your Windows® PC while holding the blue config button for 5 seconds until the LEDs turn PURPLE.
Open the ZenLINK™ Configurator Tool (Right click on the shortcut and select Run as Administrator).
Select Native PS5®.
Enter Wi-Fi details manually or Read Settings From Windows®. Note: If this step doesn't work, check to see if you have both 2.4GHz and 5GHz Wi-Fi options on your network and make sure you're connected to 2.4GHz (see troubleshooting below regarding 2.4GHz modem support).
Click Save And Continue.
Wait for Saving Configuration and Flashing Firmware to complete. Do not disconnect the device during this process!
When Configuration Complete is shown, click Close Application and confirm Yes to close the app.
Your ZenLINK™ is now ready to hook up to your Cronus Zen™.
You can revert your PC to a 5GHz or wired LAN connection if that's what you were previously using.
Step 5: Connect Zen to a PS5®
Connect the ZenLINK™ into the A1 USB Port (left side) of your Cronus Zen™ device.
Using the CONSOLE USB Port on your Cronus Zen™, connect directly to your PS5®. The ZenLINK™ LED will turn ORANGE, indicating successful connection to your Wi-Fi network.
Connect your DualSense® controller directly to the front A2 or A3 USB Ports of your Cronus Zen™. Wait until the ZenLINK™ LEDs change to GREEN.
Once your Cronus Zen™ successfully syncs with your PS5®, the ZenLINK™ LEDs will change to BLUE as soon as you start playing a PS5® game, signaling you're connected and ready to enjoy full Cronus Zen™ functionality on your PS5®. 🙂
ZenLINK™ Device Buttons
How to Enter ZenLINK™ Config Mode: HOLD the BLUE CONFIG BUTTON for at least 5 seconds while plugging into PC until the LEDs turn PURPLE. They will then either turn ORANGE (Wi-Fi connected) or BLINK RED (no Wi-Fi set).
PURPLE and GREEN means no update available.
To perform a Factory Reset, HOLD the FACTORY RESET BUTTON (paperclip hole underneath) while plugging into the PC until the LEDs turn PURPLE then BLINK RED.
Troubleshooting
ZenLINK™ LEDs
Please refer to the various ZenLINK™ LED indicators and their meanings below to assist with troubleshooting.
Device LED (Config Mode):
PURPLE LED means config mode.
ORANGE LED means successfully connected to Wi-Fi.
Blinking RED LED means no Wi-Fi settings are setup.
Blinking BLUE LED in config mode means firmware is updating (DO NOT UNPLUG!)
CYAN LED means Zen Console Mode ready. Note: This is briefly shown when the ZenLINK™ is unplugged/plugged back in.
Device LED (Console Mode):
CYAN LED means Console Mode ready.
ORANGE LED means successfully connected to Wi-Fi.
Blinking RED LED means no Wi-Fi found.
Blinking PURPLE LED means failure to connect to console (make sure PS Remote Play® on your PC is correctly connected to your PS5).
Single LIGHT GREEN flash then LED off means retrying connection.
RED/BLUE flashing means Remote Play disconnected.
STEADY GREEN means successfully connected.
ZenLINK™ Red LED (no Wi-Fi)
Make sure your Windows® PC is connected to the same Wi-Fi network as your PS5® (and of course make sure the PS5® is turned on and connected). If your computer is currently using a wired LAN (Ethernet) connection, temporarily disconnect the cable and switch to Wi-Fi for the duration of the PS Remote Play® and ZenLINK™ setup process.
Your Wi-Fi router must support the 2.4GHz band. Most modern Wi-Fi routers combine their 2.4GHz and 5GHz networks under the same Wi-Fi name ( SSID ), so you typically won't need to worry about this step. However, if your router has separate SSID connections for each band, be sure to connect your PC to the 2.4GHz network specifically.
Random Disconnections
UPNP must be enable in the routers settings. Another solution is to put ZenLINK™ and the PS5® on a static IP address with port forwarding enabled (see the instructions for your router).
TCP port 9295 → 9295 TCP port 9304 → 9304 TCP port 8572 → 8572 UDP ports 9000-65535 → 9000-65535
No Wired Headset Audio
If your wired headset isn't working and your DualSense® is connected by USB cable to your Cronus Zen™, you will need to manually change the Remote Play Input Device to USB Headset on your PS5®.
⚙️ Settings > Sound > Microphone > Input Device > Select USB Headset
A wired Headset is not supported when your DualSense® is paired to the Cronus Zen™ using Bluetooth. However, a USB or wireless headset or that connects directly to the PS5® works fine.
Console Name Not Set
Ensure your PS5® console has a name in its Console Information section prior to setup. It is given a name by default, but there is a chance you may have removed it at some point.
DualSense® Edge Curve
If you are using a DualSense® Edge controller, you must change the built-in Right Stick Sensitivity/Deadzone settings to default or it will break the functionality of many M.O.D.s including Silent Aim v2.
Go to Settings > Accessories.
Select DualSense® Edge Wireless Controller > Custom Profiles.
Select Create Custom Profile, call it BEAM, then select OK.
Select the profile you created and...
Right Stick Sensitivity Curve: Default
Curve Adjustment: 0
Deadzone Adjustment: 0%
Important Notes
ZenLINK™ MUST be within reasonable range of your wireless router/modem to ensure smooth operation; otherwise lag and disconnecting could occur. You should have a good idea from your other devices as to whether you are within a decent Wi-Fi signal range.
ZenLINK™ uses similar technology to PlayStation® Portal and as such, it is subject to the same restrictions. For the best possible experience, minimize the amount of high bandwidth devices and apps like Netflix® running on your network while you are playing. If your internet is unstable or your network is prone to dropping out, it will affect the performance of ZenLINK™ .
Connect your PS5® console via wired ethernet if possible. The PS5® puts out plenty of hot air near the ethernet connection, so if you see instances of your ethernet connection dropping out on your console, you may need a higher quality cable.
Be aware that PS Remote Play® will disconnect from ZenLINK™ after an idle period.
Disclaimers
Any use of this product means being aware of and agreeing to the following:
⚠️ Usage Agreement
Zen Link™ is an expansion product that requires a separate purchase of a Cronus Zen™ device. Access to a Windows™ 10/11 PC is required for initial updating and completion of ZenLINK™ setup. At this time, Cronus Zen™ itself still requires frequent access to a Windows™ 10/11 PC for Zen Studio™ configuration. ZenLINK™ uses PS Remote Play which requires an active PSN® account.
⚠️ Trademark Notice
Zen Link™ is a trademark of Collective Minds Gaming Co. Ltd. All product names, logos, brands, and other trademarks, images, or videos mentioned in this manual or on the website are used solely for identification purposes and remain the property of their respective trademark holders. These trademark holders are NOT affiliated with Collective Minds Gaming Co. Ltd., and they DO NOT sponsor or endorse its products, services, or websites. The trademarks "PlayStation®", PlayStation®5", PS5®, PSN®, DualSense® are owned by Sony Interactive Entertainment.
Last updated