GAMEPACK Setup | Apex
Settings Navigation & REQUIRED GAMEPACK Setup in Apex Royale, STRIKEPACK CENTRAL™ GAMEPACK for STRIKEPACK HORIZON™.
Overview
This section covers "Settings Navigation" & REQUIRED "GAMEPACK Setup", featured in our Apex Royale GAMEPACK for the STRIKEPACK HORIZON™ controller adapter & powered by the STRIKEPACK™ CENTRAL smartphone app.
You MUST fulfill the REQUIREMENTS of this section & continue to follow our manual to successfully take advantage of this GAMEPACK & various M.O.D.s or Macros On Demand that it has to offer.
The GAMEPACK can be configured in its entirety using familiar touch controls on the app.
It is REQUIRED to complete this section before using this GAMEPACK…
Profile Selection
Tap on the GAMEPACK to go to Profile Selection, then you can either tap CM_Default to head straight to the Dashboard area, or you can create a new profile:
To create a profile,
tap the green 
PLUS icon.Select an icon, then name your profile. If this does not automatically exit & save your profile, you can
tap the SAVE icon, located at the top-right.- Tap your newly created profile to proceed to the Dashboard. The Gearhead Eyes on the STRIKEPACK HORIZON™ will switch to PULSING GREEN, indicating GAMEPACK MODE.
You can store up to 9 profiles per GAMEPACK, allowing for wildly different settings for your various gameplay strategies, friends, or family. These profiles will remain saved for as long as the app is installed, with the exception of a major update, in which case you will be warned that if you agree to it, your profiles will be cleared.
To edit a profile's name & icon, reset its settings to default, or delete it altogether, you can 
hold your finger on the profile's icon until the following menu appears:
⚠️ With only a single profile remaining, it can be reset, but not deleted.
App Controls
Various types of settings that you will encounter in this GAMEPACK:
The Option setting can be changed by tapping its 
arrow
icons. You can bring up its Option Selector by holding your finger on its section until it fully traces itself. This lists all of its options for you to tap on the one that you want selected:
The Slider setting can be precisely adjusted by tapping its 
minus or 
plus icons. It can be quickly adjusted by holding & dragging its slider thumb:
The Toggle setting can be tapped to switch between 
OFF /
ON. While typically an off or on switch, it may represent a choice between 2 active features:
Dashboard settings can have Controller Shortcuts that will become visible when the 
ACTIVATOR controller button is HELD. These shortcuts will be covered later on.
Tap the 
Information icon on settings to learn more about them.
There is NO need to rush into changing Dashboard settings as their functionality will be covered piece by piece throughout this entire manual.
Match Settings
All REQUIRED GAMEPACK Setup settings & less frequently accessed settings are tucked away in the Settings area, which is accessible by tapping the 
GEAR icon, located at the top-right.
From the Settings area, tap the drop-down arrows to expand each section of the grey border area & ensure that these settings are MATCHED to your in-game settings.
Behind the scenes, each setting points various M.O.D.s (Macros On Demand) to the correct controller buttons at the correct level of optimization for your in-game settings.
Warning: DO NOT miss any settings within the grey border or you risk an adversely affected experience, but keep in mind that it ONLY covers in-game settings that are relevant to the M.O.D.s. Keep an eye on the Settings area between GAMEPACK updates in case new settings are added & ensure that your settings remain MATCHED.
Unfortunately, it is NOT viable for our team to support every possible in-game configuration. Even supported in-game settings may not include all possible steps or options. Consider reviewing which in-game settings you are using & avoid making console system-wide changes to your controls.
‼️ There is NO need to concern yourself with the settings that are NOT surrounded by a grey border yet, as these will be covered throughout this manual.
When you are done matching settings, tap the back-arrow, located at the top-left, to return to the Dashboard.
Legend Select
This GAMEPACK has an additional REQUIRED setting on the Dashboard...
You MUST MATCH your Current Legend. Select the character that you are currently playing with.
You can reach for the app controls, or while ACTIVATOR is HELD, 
LEFT BUMPER can be TAPPED to make your selection. The first TAP will activate the selection, then further TAPS will cycle through the characters. Even if this setting is out of view, there will be pop up notifications & sound alerts. Upon MATCHING your in-game character, RELEASE ACTIVATOR.
Known Requirements
The following in-game settings are known to be REQUIRED to ensure that M.O.D.s function correctly:
CONTROLLER VIBRATION: ON [IN-GAME & CONSOLE SYSTEM-WIDE]
(ADS) SENSITIVITY: 7 [OR LOWER]
CUSTOM LOOK CONTROLS: OFF
*NEW* FIELD OF VIEW (FOV): 110
INTERACT/RELOAD BUTTON: TAP TO RELOAD
LOOK DEADZONE: SMALL
PER OPTIC ADS SENSITIVITY: ON
1x - 10x OPTIC SIGHTS: SAME ADS SENSITIVITY
RESPONSE CURVE: CLASSIC
WEAPON AUTO-CYCLE ON EMPTY: OFF
VIBRATION: STANDARD
If you opt to deviate from any Known Game Requirements, you are on your own, although you can often work around Optimized Anti-Recoil deviations with the Quick Edit Anti-Recoil feature, which will be covered later on in this manual.
Bottom-Bar
And that covers the REQUIRED GAMEPACK Setup. From the Dashboard area, you can access the Bottom-Bar, as covered in the GAMEPACK Setup video & the following subpages:
1a. Mapping
1b. Controller
1c. Block M.O.D.s
1d. Audio
1e. Support
Last updated