2. Perfect Pitch
Perfect Pitch in Baseball Series, STRIKEPACK CENTRAL™ GAMEPACKs for STRIKEPACK HORIZON™.
Last updated
Perfect Pitch in Baseball Series, STRIKEPACK CENTRAL™ GAMEPACKs for STRIKEPACK HORIZON™.
Last updated
This section covers "Perfect Pitch", featured in our Baseball Series 23/24 GAMEPACKs for the STRIKEPACK HORIZON™ controller adapter & powered by the STRIKEPACK CENTRAL™ smartphone app. You will be guided you through the "Perfect Pitch" M.O.D. (Macro On Demand) in the order of setting it up & using it in-game.
The following in-game settings are known to be REQUIRED to ensure that "Perfect Pitch" functions correctly:
CONTROLLER VIBRATION: ON [IN-GAME & CONSOLE SYSTEM-WIDE]
PITCHING INTERFACE: PINPOINT PITCHING
STEP 1: Head over to your game's Practice Mode, along with the team that you plan to set up as your pitching team.
STEP 2: Choose an in-game pitcher to set up first.
STEP 6: Repeat STEPS 4-5 until the timing is within 0.05 seconds, or as desired for each pitch button.
STEP 7: Use your in-game settings to place someone on base & ensure that you are still using the same pitcher.
STEP 9: Repeat STEPS 4-6 with ON Base timings.
STEP 10 (Optional): On the Dashboard, you can match the "Pitcher Name" with your in-game pitcher to ensure that you never forget who these settings are associated with.
STEP 12: Repeat STEPS 3-11 with for each new pitcher. You can configure up to 4 pitchers.
This section assumes that you have been through Perfect Pitch Setup first.
Optionally, MOVING LEFT STICK will also change the aim of the pitch.
While ACTIVATOR is HELD, LEFT TRIGGER can be TAPPED to cycle through the 4 Pitchers. These essentially function as 4 loadouts:
STEP 3: On the Dashboard, you MUST MATCH each "Pitch Type" to your in-game pitcher's pitch types, ensuring that they are assigned to the correct button locations that correspond with your game. Under Pitch Type, you can tap each rectangle to cycle through the available pitch types, or you can hold your finger on a rectangle to bring up its option selector.
STEP 4: While HOLDING RIGHT TRIGGER, TAP one of your PITCH buttons, then RELEASE RIGHT TRIGGER to perform the in-game pitch for that pitch button.
STEP 5: On the Dashboard, you MUST MATCH the "Pitch Delay" with how early your in-game pitch timing was. Under Pitch Delay, tap the associated rectangle to enter your timing with your device's numpad.
STEP 8: On the Dashboard, select "ON Base" .
STEP 11: On the Dashboard, change the "Active Pitcher" so that you can set up the next pitcher, or while ACTIVATOR is HELD, TAP LEFT TRIGGER to cycle through the Active Pitcher.
While HOLDING RIGHT TRIGGER, TAP one of your PITCH buttons displayed on the screen. RELEASE RIGHT TRIGGER to perform the associated pitch type with the associated pitch delay (shown on the same row on the Dashboard).
While HOLDING RIGHT TRIGGER, HOLD one of your PITCH buttons displayed on the screen. You can adjust its associated "Pitch Delay" by moving the following controls left or right:
LEFT STICK: decrease / increase by 1s.
D-PAD: decrease / increase by 0.1s.
RIGHT STICK: decrease / increase by 0.01s.
While HOLDING RIGHT TRIGGER:
TAP UP to toggle to ON Base .
TAP DOWN to toggle to OFF Base .
