GAMEPACK Setup | COD BOCW

Settings Navigation & REQUIRED GAMEPACK Setup in COD BOCW 20, STRIKEPACK CENTRAL™ GAMEPACKs for STRIKEPACK HORIZON™.

	1. GAMEPACK Setup

---

GAMEPACK SETUP Page Contents

Overview

Create Profile

Dashboard

Match Settings

Known Requirements

Bottom-Bar

Overview

This section covers "Settings Navigation" & REQUIRED "GAMEPACK Setup", featured in our COD BOCW 20 GAMEPACK for the STRIKEPACK HORIZON™ controller adapter & powered by the STRIKEPACK™ CENTRAL smartphone app.

---

You MUST fulfill the REQUIREMENTS of this section & continue to follow our manual to successfully take advantage of these GAMEPACKs & various M.O.D.s or Macros On Demand that they have to offer.

---

The GAMEPACKs can be configured in their entirety using familiar touch controls on the app.

It is REQUIRED to complete this section before using these GAMEPACKs…

Profile Selection

Tap on the GAMEPACK to go to Profile Selection, then you can either tap CM_Default to head straight to the Dashboard area, or you can create a new profile:

1. To create a profile, tap the green PLUS icon.
2. Select an icon, then name your profile. If this does not automatically exit & save your profile, you can tap the SAVE icon, located at the top-right.
3. Tap your newly created profile to proceed to the Dashboard. The Gearhead Eyes on the STRIKEPACK HORIZON™ will switch to PULSING GREEN, indicating GAMEPACK MODE.

You can store up to 9 profiles per GAMEPACK, allowing for wildly different settings for your various gameplay strategies, friends, or family. These profiles will remain saved for as long as the app is installed, with the exception of a major update, in which case you will be warned that if you agree to it, your profiles will be cleared.

---

To edit a profile's name & icon, reset its settings to default, or delete it altogether, you can hold your finger on the profile's icon until the following menu appears:

⚠️ With only a single profile remaining, it can be reset, but not deleted.

App Controls

Various types of settings that you will encounter in this GAMEPACK:

Option Setting

The Option setting can be changed by tapping its arrow icons. You can bring up its Option Selector by holding your finger on its section until it fully traces itself. This lists all of its options for you to tap on the one that you want selected:

Slider Setting

The Slider setting can be precisely adjusted by tapping its minus or plus icons. It can be quickly adjusted by holding & dragging its slider thumb:

Toggle Setting

The Toggle setting can be tapped to switch between its OFF & ON position. While typically an off or on switch, it may represent a choice between 2 active features:

Controller Shortcuts

Dashboard settings can have Controller Shortcuts that will become visible when the ACTIVATOR controller button is HELD. These shortcuts will be covered later on.

Tap the Information icon on settings to learn more about them.

---

There is NO need to rush into changing Dashboard settings as their functionality will be covered piece by piece throughout this entire manual.

Match Settings

All REQUIRED GAMEPACK Setup settings & less frequently accessed settings are tucked away in the Settings area, which is accessible by tapping the GEAR icon, located at the top-right.

From the Settings area, tap the drop-down arrows to expand each section of the grey border area & ensure that these settings are MATCHED to your in-game settings.

• Behind the scenes, each setting points various M.O.D.s (Macros On Demand) to the correct controller buttons at the correct level of optimization for your in-game settings.

Placeholder image does not represent actual settings.

Warning: DO NOT miss any settings within the grey border or you risk an adversely affected experience, but keep in mind that it ONLY covers in-game settings that are relevant to the M.O.D.s. Keep an eye on the Settings area between GAMEPACK updates in case new settings are added & ensure that your settings remain MATCHED.

---

Unfortunately, it is NOT viable for our team to support every possible in-game configuration. Even supported in-game settings may not include all possible steps or options. Consider reviewing which in-game settings you are using & avoid making console system-wide changes to your controls.

‼️ There is NO need to concern yourself with the settings that are NOT surrounded by a grey border yet, as these will be covered throughout this manual.

---

When you are done matching settings, tap the back-arrow, located at the top-left, to return to the Dashboard.

Known Requirements

The following in-game settings are known to be REQUIRED to ensure that M.O.D.s function correctly:

• CONTROLLER VIBRATION: ON [IN-GAME & CONSOLE SYSTEM-WIDE]

• ADS SENSITIVITY MULTIPLIER (LOW/HIGH ZOOM): 1.00

• AIM DOWN SIGHT BEHAVIOR: HOLD

• AIM RESPONSE CURVE TYPE: STANDARD

• DEPLETED AMMO WEAPON SWITCH: OFF

• STEADY AIM BEHAVIOR: HOLD

• STICK SENSITIVITY: SAME MATCHING VALUE

• USE/RELOAD BEHAVIOR: TAP TO RELOAD

If you opt to deviate from any Known Game Requirements, you are on your own, although you can often work around Optimized Anti-Recoil deviations with the Quick Edit Anti-Recoil feature, which will be covered later on in this manual.

Bottom-Bar

And that covers the REQUIRED GAMEPACK Setup. From the Dashboard area, you can access the Bottom-Bar, as covered in the GAMEPACK Setup video & the following subpages:

• 1a. Mapping
• 1b. Controller
• 1c. Block M.O.D.s
• 1d. Audio
• 1e. Support