⏺️ Combo Record & Playback ▶️

For ALL STRIKEPACK HORIZON™ series gaming adapters

Page Contents

Mapping on Controller

Demonstration

Mapping Mode Guide

Video Guide

Written Guide

This section provides instructions for recording and playing back combos in the Action Gamepack.

the Paddle Buttons through your controller, which is also how you map them in Tournament Mode. Switch between tabs below for a quick demonstration of Mapping Mode on your Strikepack model:

Demonstration

150

CM00150

141

149

Tournament Mode vs. Gamepack Profile Mapping:

---

Paddle Button mapping on the STRIKEPACK HORIZON™ series works differently from previous Strikepack models. Its Mapping Mode is designed to prevent accidental mapping during gameplay, and it supports multiple mapping configurations through GAMEPACK profiles in the STRIKEPACK CENTRAL™ app.

---

Tournament Mode disables M.O.D.s (Macros On Demand), making it suitable for competitive-like environments. It features its own dedicated Paddle Button mapping, adjustable only through Mapping Mode using your controller. Tournament Mode is active by default whenever the Strikepack is plugged in or restarted, as long as NO GAMEPACK profile is selected.

---

Each GAMEPACK profile also features its own unique Paddle Button mapping. If Mapping Mode is entered while a profile is active, the STRIKEPACK CENTRAL™ app will open that profile’s Mapping section. Any changes you make will only apply to the currently selected profile.

Mapping Mode Guide 🎮

📺 Video Guide 🎞️

150

Function button (left-hand side), used in this video, is now the only button that enters Mapping Mode.

141/149

📓 Written Guide ✏️

1

Entering Mapping Mode

Locate the Function button—the unlabeled button on the left-hand side of your Strike Pack—enabled controller. Hold it until the Strike Pack LEDs turn Purple, indicating you've entered Mapping Mode.

2

Mapping a Controller Button to a Paddle Button

While holding any button on your controller, tap one of the four available Paddle Buttons to map to it. The LEDs will flash Green to confirm a successful mapping.

As long as they are held together, up to four controller buttons can be mapped to a single Paddle Button. Even stick direction can be mapped as simplified 8-way directional movement.

3

Unmapping a Controller Button from a Paddle Button

To unmap a Paddle Button, tap it while you are not touching any controller buttons or sticks. The LEDs will flash Red to confirm a successful unmapping.

4

Exiting Mapping Mode

To save your changes and test your Paddle Button mapping, you must exit Mapping Mode. Simply tap either the Function or Restart button. The Strike Pack LEDs will return to their previous status, confirming that Mapping Mode has been exited.

---