Menu Navigation | Grand Theft Online
Featured in Grand Theft Online GAMEPACK, "Menu Navigation" covers this GAMEPACK's built-in "Menu Mode". This lets you adjust your M.O.D. selections directly from your controller. It involves button navigation and counting LEDs so if you find that complicated, just stick to M.O.D. CENTRAL™.
For a basic idea of how a typical GAMEPACK Menu Mode looks and works in practice, please see either PS Dominator, XB Dominator, or XB Eliminator. Keep in mind though that the menu layout of each GAMEPACK is unique...
Numbered "M.O.D.s" are organized into categories known as "Classes". While navigating Menu Mode, you will need to refer to this GAMEPACK's specific layout.
PS4®: To enter Menu Mode, 
HOLD 
LEFT D-PAD for at least 5 seconds, and remain HOLDING LEFT D-PAD to stay in Menu Mode:
Count the Green LED flashes to get the number of the selected Class. By default, that's Class 1, so it'll flash once (1x) on repeat. Class 2 flashes 2x on repeat, Class 3 flashes 3x on repeat, etc.
TAP the following buttons to navigate:
goes ⬆️Up a Class number (> 2 > 3...).
goes ⬇️Down a Class number (...> 2 > 1).
Once you've selected a Class, similarly count the Purple LED flashes to get the number of its Enabled M.O.D.. No purple flash is M.O.D. Disabled (0). Most Classes have a 0/OFF state that they default to.
goes ⬆️Up an Enabled M.O.D. number (> 1 > 2 > 3...).
goes ⬇️Down an Enabled M.O.D. number (...> 2 > 1 > 0).
Xbox®: To enter Menu Mode, HOLD 
LEFT D-PAD for at least 5 seconds, and remain HOLDING LEFT D-PAD to stay in Menu Mode:
Count the White LED flashes to get the number of the selected Class. By default, that's Class 1, so it'll flash once (1x) on repeat. Class 2 flashes 2x on repeat, Class 3 flashes 3x on repeat, etc.
TAP the following buttons to navigate:
goes ⬆️Up a Class number (> 2 > 3...).
goes ⬇️Down a Class number (...> 2 > 1).
Once you've selected a Class, similarly count the Green LED flashes to get the number of its Enabled M.O.D.. No green flash is M.O.D. Disabled (0). Most Classes have a 0/OFF state that they default to.
goes ⬆️Up an Enabled M.O.D. number (> 1 > 2 > 3...).
goes ⬇️Down an Enabled M.O.D. number (...> 2 > 1 > 0).
You MUST be selected on the correct Class M.O.D. to adjust it.
An adjustable setting will sometimes be shared by several M.O.D.s.
1: ADS Anti-Recoil
1: Enabled
2: Enabled Inverted
ADS Anti-Recoil Weight Recording:
Ensure you are in Menu Mode via HOLDING Left D-Pad, and navigated to Class 4, M.O.D. 1 for Enabled, or M.O.D. 2 for Enabled Inverted Y Support. HOLD LT/L2 to record. Control recoil by tilting Aim/Cam Stick down, keep it steady for one second, then RELEASE LT/L2 & Stick to Record Result. Save to Anti-Recoil Profile: While HOLDING LT/L2, TAP 1 of 4 Face Buttons.
ADS Anti-Recoil Weight Adjustment: LB/L1 Heavier | RB/R1 Lighter | RT/R2 Test / Higher recoil requires heavier weight, but too much weight points at floor.
2: Easy Auto Run/Swim/Climb
1: Auto Run - Always Activate
2: Auto Run - Press Sensitive
3: Easy Run - Hold
Last updated