Ⓜ️Mapping
Controller Button to Paddle Button Mapping.
Last updated
Controller Button to Paddle Button Mapping.
Last updated
"Paddle Button" is a universal term for Paddle or Action/Back Button.
STRIKEPACK HORIZON™ features 4 numbered Paddles:
STRIKEPACK HORIZON™ features per GAMEPACK Profile Paddle Button Mapping:
This features Controller Button to Paddle Button Mapping:
It will be singled out as highlighted & selected, with 16 mappable controller buttons on display for you to swipe through.
You can map up to 4 controller buttons to be simultaneously pressed, per Paddle Button:
It is possible to map Paddle Buttons on the STRIKEPACK HORIZON™ controller adapter without reaching for the app. The video below shows this process for both Tournament Mapping & GAMEPACK Mapping:
If you are in a GAMEPACK profile, "Paddle Button Mapping" will have automatically popped up on the app to provide visual indication.
Repeat STEP 2 for each Paddle Button that you want to map controller buttons to.
If you are in a GAMEPACK profile, this will close "Paddle Button Mapping".
And that covers "Mapping". "Controller" will be covered next...
Tap the Mapping icon, located on the bottom-bar, to either open or close the "Paddle Button Mapping" section.
Tap the Paddle Button that you have assigned to Mapped Buttons.
To map to the Paddle Button, tap a button icon to highlight & map it.
To unmap from the Paddle Button, tap a highlighted button icon to unmap it, or tap Clear ALL Mapped Buttons to clear the Paddle Button.
Remember that tapping the Mapping icon again will close the section.
HOLD either one of the MAPPING buttons on the STRIKEPACK HORIZON™ until the Gearhead Eyes & both RGB LEDs turn a shade of PURPLE. You can now RELEASE the Mapping Mode button.
You can HOLD 1-4 controller buttons together to be mapped to a Paddle Button. While you are HOLDING the controller button(s) that you wish to map, TAP the PADDLE BUTTON that you want to map to. A successful mapping assignment will flash GREEN.
To unmap (clear) a Paddle Button, while NO controller buttons are held, TAP the PADDLE BUTTON that you want to clear. A successful unmapping will flash RED.
To exit Mapping Mode, TAP either one of the MAPPING buttons.
