Quick Edit Anti-Recoil | COD MW3 / WZ
Quick Edit Anti-Recoil adjustments via your controller in COD MW3-2023 / WZ, STRIKEPACK CENTRAL™ GAMEPACKs for STRIKEPACK HORIZON™.
Overview
This section covers "Quick Edit Anti-Recoil", featured in our COD MW3-2023 / WZ GAMEPACKs for the STRIKEPACK HORIZON™ controller adapter & powered by the STRIKEPACK CENTRAL™ smartphone app.
Before continuing, please ensure that you have at least completed GAMEPACK Setup, Weapon Swap Mode, & Weapon Setup. You MUST be comfortable with managing your ACTIVE Weapon Slot & Weapon M.O.D.s to proceed...
You can apply Anti-Recoil adjustments to your ACTIVE Weapon Slot via your controller. Anti-Recoil can be applied to a GENERIC Fire Mode, or in the case of weapon-specific Optimized Anti-Recoil, you can adjust for recoil differences from weapon attachments, game updates, or unsupported settings.
Remember that Anti-Recoil settings are per Weapon Slot.
1. Getting Started
Once you are in-game 🎮, position yourself & aim at a wall 🧱 or static target 🎯, ensuring that you have plenty of ammo & space to compare recoil. Switch to the in-game weapon 🔫 that you will be using, such as your Primary Weapon. Ensure the Weapon Slot that you intend to adjust is ACTIVE, or highlighted on the Dashboard.
Ensure that the following setting is toggled to Directional Quick Edit for now:
2. Enter Quick Edit
Your controls will be restricted, but you will be allowed to move around & test your current weapon.
3. Vertical Adjust
It is wise to focus on vertical adjustment first:
4. Horizontal Adjust
If your aim is drifting in both directions, this type of horizontal recoil CANNOT be fixed & Horizontal Adjust MUST be kept at its default 0 value.
5. Reset
If you get into a mess, at any point in Quick Edit Mode, you can opt to reset your adjustments to default. This reset will only affect the ACTIVE Weapon Slot:
6. Exit Quick Edit?
Focus on fine tuning to acceptable results, as your weapon may have some random recoil, and that CANNOT be fixed:
At this point, you are essentially done with tailoring Anti-Recoil for this Weapon Slot to suit your current in-game weapon. Feel free to repeat the process for your Secondary Weapon Slot & in-game Secondary Weapon. But what if you are unhappy with your adjustments instead?
7. Pattern Strength
If the Weapon Slot is assigned to a supported weapon, you are adjusting Optimized Anti-Recoil, and your results have been unsuccessful, there is another option available in toggling to Pattern Strength Quick Edit.
Pattern Strength suits a weapon best when its recoil pattern has maintained its base shape; just shrunken or enlarged. This can be the case with certain weapon attachments & unsupported settings, or after a game update has only made slight alterations. Ensure that everything is set up the way that you want it before you try Pattern Strength.
You can toggle the setting from the Dashboard, or your controller. While toggling from the app will leave existing Anti-Recoil values alone, values are NOT interchangeable between Directional & Pattern Strength. Therefore, toggling from your controller will reset them for your convenience.
Now, instead of applying a directional pull, you will be adjusting the strength of your weapon's existing Optimized Anti-Recoil Pattern.
From here, while testing Anti-Recoil, pay attention to the vertical direction of your aim:
When you are done with vertical adjustment, you can tackle horizontal adjustment with trial & error:
In-game Aim Assist
While you are firing at an enemy, in-game aim assist can slightly interfere with Anti-Recoil. If you find this difficult to deal with, you can make tweaks such as ever-so-slightly over increasing Vertical Anti-Recoil, or for a GAMEPACK with Optimized Anti-Recoil, Anti-Recoil Mode features solutions to mitigate the issue.
Last updated
