Last updated
For STRIKEPACK™ with M.O.D.|PASS™.
Action Mode is a M.O.D. CENTRAL™ GAMEPACK Configuration setting in Minecrft GAMEPACK! These M.O.D.s (Macro On Demand) will remove the need to spam the ATTACK or PLACE BLOCK buttons.
With Controller Shortcuts, you can quickly toggle the two Action Modes during play (you can use them both at the same time):
Rapid Attack:
You will feel a rumble indicator:
Heavy Rumble: ON
Light Rumble: OFF
Rapid Place Block:
You will feel a rumble indicator:
Two Heavy Rumbles: ON
Light Rumble: OFF
Your ACTIVE Action Mode will interfere with certain gameplay functions; toggle it OFF while NOT in combat.
If your Attack or Place Block button is a TRIGGER, you can change how the Action Mode is activated in the GAMEPACK Config:
"Always Activated" is the default setting: If the assigned TRIGGER is pressed, the Action Mode activates.
"Fully Hold Activation": If the assigned TRIGGER is pressed all the way down, the Action Mode activates.
"Fully Hold Blocked": If the assigned TRIGGER is pressed all the way down, the Action Mode deactivates.
While HOLDING ACTIVATOR, TAP RIGHT TRIGGER/.
While HOLDING ACTIVATOR, TAP /LEFT TRIGGER.
Rapid Attack: HOLD the ATTACK button to continuously attack, mine, or break, as quickly as possible.
Rapid Place Block: HOLD the ATTACK button to continuously place blocks or use items, as quickly as possible.
