GAMEPACK Setup | COD WZ
REQUIRED "GAMEPACK Setup" in M.O.D. CENTRAL™ for COD WZ GAMEPACK! Match the ORANGE settings in the GAMEPACK Configuration to your in-game Button Layout and Settings. Set the BLUE settings in the GAMEPACK Configuration to your preference. Set the correct required SENSITIVITY and RESPONSE CURVE settings in your game.
Known Requirements
Warning: The COD WZ GAMEPACK is the latest GAMEPACK for COD WZ, and uses Anti-Recoil powered by the BEAM team. It uses the new "Global Scaling" system. It is the first GAMEPACK on M.O.D.|PASS™ to use this system. In the M.O.D. CENTRAL™ GAMEPACK Configuration, you will find blue settings.
These blue settings allow the GAMEPACK itself to apply an additional response curve and alteration to your sensitivity. This is because you absolutely must use very specific in-game settings for Anti-Recoil to work correctly:
HORIZONTAL STICK SENSITIVITY: 4.0
VERTICAL STICK SENSITIVITY: 4.0
RESPONSE CURVE: STANDARD
ADS SENSITIVITY MULTIPLIER (LOW/HIGH ZOOM): 1.00
ADS STICK SWAP: OFF
AIM DOWN SIGHT BEHAVIOR: HOLD
CONTROLLER ORIENTATION: UP
CUSTOM SENSITIVITY PER ZOOM: OFF
DEPLETED AMMO WEAPON SWITCH: OFF
INTERACT/RELOAD BEHAVIOR: TAP TO RELOAD
SLIDE/DIVE BEHAVIOR: HYBRID
SPRINT/TACTICAL SPRINT BEHAVIOR: TOGGLE
As you can see, in-game Sensitivity: 4.0 is required, as is in-game Response Curve: Standard. Many of you are probably not going to like your sensitivity being this high and may want a different response curve, so that is where the blue settings in the GAMEPACK Config come in. The information and images below depict the changes or non-changes that will be made to Standard response curve. The GAMEPACK sensitivity and response curves are NOT 1-to-1 with the game, so you will need to experiment, as the Standard response curve will become more cut off at lower sensitivities.
For the GAMEPACK Response Curves,
There are currently three Response Curves that we've created, though we are open to creating more if needed.
Baseline is neutral, default behavior (it respects the in-game Standard curve, which means any curvature will come from Standard, not Baseline).
Gradual is gentle, slower ramp-up, controlled.
Aggressive is fast, sharper response, twitch.
Match Settings
REQUIRED GAMEPACK Setup settings are located near the top of the M.O.D. CENTRAL™ GAMEPACK Config. Ensure ALL ORANGE "MATCH IN-GAME" settings closely MATCH your in-game settings, that's Button Layouts, Custom Buttons, Stick Layouts, FOV, Invert Vertical Look.
Individual "MATCH IN-GAME" buttons will ONLY apply when "Custom" is selected. Unless you are using a predefined button layout as is, select "Custom".
Each ORANGE SETTING will direct M.O.D.s (Macros On Demand) to the correct controller buttons and optimization level for your in-game settings.
Warning: DO NOT MISS any ORANGE SETTINGS or risk an adversely affected experience. Settings ONLY cover supported in-game settings that are relevant to M.O.D.s. Check the Config regularly for new settings to ensure your settings remain MATCHED.
Save Config & Slots
Remember to "Save Configuration" when you are done with GAMEPACK Setup or any other changing of GAMEPACK Config settings. Following this, "Save Slots to Device" to install the GAMEPACK to the STRIKEPACK™ device. This will also update all installed GAMEPACKs to their latest version.
Last updated